Hello
Need help?
  • Home
  • Product Menu Icon
  • Blog
  • Product Menu Icon
  • Wooden tiles sizes in mm and feet: which plank suits which room

16 November 2026 6 min read

Wooden tiles sizes in mm and feet: which plank suits which room

Wooden tiles sizes in mm and feet: a room floored with Metro wood-look tiles

Tiles are sold in millimetres. Rooms in India are measured in feet. Your contractor quotes in sq ft, the catalogue lists 200x1200mm, and somewhere between the two a buyer ends up guessing how big a plank really is.

This guide converts every Metro wooden tile size into inches and feet, gives the box coverage in sq ft, and matches each plank to the rooms it suits. For a look at layouts and styles, see wooden tiles design ideas for Indian homes.

How the conversion works

One inch is exactly 25.4 mm, a value fixed internationally since 1959 and set out by NIST. One foot is 12 inches, so 304.8 mm. Divide a tile's millimetres by 25.4 for inches, or by 304.8 for feet.

Dealers usually round these figures. A 200x1200mm plank gets called "8 by 48 inches", which is close but not exact: 200 mm is 7.87 inches and 1200 mm is 47.24 inches. For buying, the rounding does no harm. For planning a doorway or a wall where every few millimetres count, work from the millimetre size.

Every plank size in feet and inches

Metro makes four plank sizes, plus the chevron and Diamante collections.

150x900mm

About 5.9 x 35.4 inches, or roughly 0.49 x 2.95 ft. One tile covers about 1.45 sq ft, and the box of 8 covers 11.62 sq ft. See the 150x900mm range, 70 designs.

200x1000mm

About 7.9 x 39.4 inches, or roughly 0.66 x 3.28 ft. One tile is about 2.15 sq ft; five come in a box, covering 10.76 sq ft. See the 200x1000mm range, 56 designs.

200x1200mm

About 7.9 x 47.2 inches, or roughly 0.66 x 3.94 ft. In plain words, a plank a little under 8 inches wide and a little under 4 feet long. Each tile covers about 2.58 sq ft. A box holds 5 tiles and covers 12.91 sq ft. This is the size with the most designs, 61 of them, on the 200x1200mm page.

200x1400mm

About 7.9 x 55.1 inches, or roughly 0.66 x 4.59 ft. At about 3.01 sq ft a tile, the box of 4 covers 12.05 sq ft. The longest board Metro makes, in 20 designs on the 200x1400mm page.

Chevron and Diamante

Chevron comes in 150x900mm (8 tiles, 11.62 sq ft a box) and 80x450mm, which is about 3.1 x 17.7 inches (30 tiles, 10.33 sq ft a box). Diamante is 203x1010mm, about 8 x 39.8 inches, an elongated hexagon packed 6 to a box for 13.24 sq ft.

Which size suits which room

The rule of thumb is that a longer plank needs a longer room. A 4.6 ft board in a 9 ft bedroom gets cut at both walls and the floor never shows a full plank's length.

Bedrooms and small rooms in a 2BHK: 150x900mm. At under 3 ft long it fits short runs without wasteful cuts, and its narrow face reads closest to a sawn timber board.

Staircases: 150x900mm as well. It covers a standard 900 mm tread in one piece. The staircase guide covers nosing and grip.

Drawing-cum-living rooms and dining areas: 200x1000mm or 200x1200mm. The wider face means fewer joints across the room, and at 12 to 18 ft both lengths lay out cleanly.

Open-plan flats, bungalow halls and showrooms: 200x1400mm. It needs a long, uninterrupted run to show its length.

Balconies and terraces: any size, with a Matt Texture surface for grip. On a narrow balcony, 150x900mm takes fewer cuts; on a wider terrace, a decking-style design such as Ipe Out Nature in 200x1200mm works well.

Counting boxes from your room size in feet

Each plank page has a coverage calculator, and it is the safest way to order. If you want to check a dealer's figure yourself, the method is short.

Multiply the room's length by its width in feet to get the area in sq ft. Add 10% for cuts and breakage. Divide by the box coverage and round up to the next whole box.

Take a 12 x 15 ft living room in 200x1200mm. The area is 180 sq ft. With 10% added it becomes 198 sq ft. Divide by 12.91 and you get 15.3, so order 16 boxes. Rounding down to 15 would leave you short on the last row, and a later box may come from a different batch.

Layouts with many cuts, such as herringbone or a room full of corners, need more than 10%. Ask your tiler before ordering.

What the size printed on the box does not tell you

The nominal size is the size the tile is sold under. The actual size of a pressed tile varies by a millimetre or two, which is why every Metro box carries a calibre code. Lay one room from a single calibre and a single batch, or the joints drift.

Thickness is not in the size either. Metro planks are 9 to 9.5 mm thick, chevron 8 mm and Diamante 9 mm. This matters at a door threshold where the new floor meets an old one.

Every Metro tile is glazed ceramic with 6 to 8% water absorption, group BIIb under EN 14411, the European standard for ceramic tiles. The edge is curved, formed in the mould rather than cut, so the joint reads as the line between two boards. The rectified vs non-rectified guide explains why that matters on a long plank.

Laying offsets by size

Metro's laying catalogue sets a quarter-plank offset, and it rules out the half offset. In feet, that works out to:

  • 150x900mm: 225 mm, about 9 inches.
  • 200x1000mm: 250 mm, about 10 inches.
  • 200x1200mm: 300 mm, about 1 ft.
  • 200x1400mm: 350 mm, about 14 inches.

Leave joints of 3 to 5 mm with spacers of at least 3 mm, and keep the arrows on the back of every plank pointing the same way.

Choose by the room's longest wall

Measure the longest uninterrupted wall in feet before you look at designs. Under about 10 ft, start with 150x900mm. Between 10 and 18 ft, 200x1000mm or 200x1200mm. Longer than that, consider 200x1400mm. Then see every design on one page, or send us your room sizes and we will suggest a format.

Planning wooden tiles for your home?

Tell us the room and the size you have in mind. Our team replies within 24 to 48 hours, and we can post you a sample first so you can see the surface in your own light.

Frequently asked questions

What is 200x1200mm in feet?

About 0.66 x 3.94 ft, or 7.87 x 47.24 inches. Dealers often round it to 8 x 48 inches. One tile covers about 2.58 sq ft, and a box of 5 covers 12.91 sq ft.

What is 150x900mm in feet?

About 0.49 x 2.95 ft, or 5.9 x 35.4 inches, often rounded to 6 x 36 inches. A box of 8 tiles covers 11.62 sq ft.

How many boxes of 200x1200mm tiles do I need for 100 sq ft?

Nine boxes. Add 10% to get 110 sq ft, divide by 12.91 sq ft a box, which gives 8.5, and round up. Use the calculator on the plank page for your exact room.

Which wooden tile size is best for a small bedroom?

150x900mm. It is under 3 ft long, so short walls take fewer cuts, and the narrow face suits a small room better than a wide plank.

Are wooden tiles the same size in every batch?

Within a small tolerance. Each box carries a calibre code for its actual size, and a room should be laid from one calibre and one batch so the joints stay even.

How thick are wooden plank tiles?

Metro planks are 9 to 9.5 mm thick. The chevron tiles are 8 mm and Diamante is 9 mm.

Chat on WhatsApp