16 November 2026 6 min read
Wooden tiles for offices, showrooms and cafés: a guide for specifiers
A café floor takes more footfall in a month than a flat takes in a year. Add chairs dragged across it all day, a trolley from the kitchen, spilt chai and a mop at closing time. A real wood floor in that setting needs sanding and resealing, and that means closing the shop for days.
This guide is for architects, interior designers and builders specifying wooden tiles in offices, showrooms, cafés and restaurants. It covers the surface for each zone, plank sizes for long runs, movement joints, and the questions to settle before the order is placed.
What a commercial floor goes through
- Grit under footwear: street dust carried in at the entrance is what wears any floor, and it concentrates in the first few metres.
- Rolling and dragged loads: office chairs on castors, shop trolleys, chairs and tables moved for cleaning.
- Spills and grease: tea, coffee, oil and water at service counters and in dining areas.
- Machine cleaning: larger floors are cleaned with scrubber driers, not a mop.
- Long runs: a showroom or open office can be 30 m or more without a wall, which changes how the floor must be laid.
Why wooden tiles suit these spaces
The glaze takes the wear. Metro's tiles are glazed ceramic, absorbing 6 to 8% water in the body. The fired glaze faces the traffic and the mop, and needs no polish or refinishing. There is no closure for sanding.
Strength: planks are 9 to 9.5 mm thick with a breaking strength of 280 to 300 kg/cm².
A floor that reads as boards: every Metro tile has a curve edge formed in the mould, so the joint reads as the shadow line between two planks. On a long run, a rounded edge also forgives the small bow that any long pressed plank can have. The guide to tile edges explains the difference from rectified tile.
No obvious repeat: each design is printed with several random faces, so across a large floor the grain does not repeat in a visible pattern. Large areas benefit from designs with a higher count: NR-142011 in 200x1400mm has 12.
Choosing the surface zone by zone
Entrances, café counters, restaurant dining and any wet zone: Matt Texture. Its grain relief gives grip when the floor is wet or carries an oil film.
Office floors, showroom display areas, reception: Satin Texture, the soft sheen with light relief, or Matt Texture if the area opens straight off the street.
Walls, counter fronts and feature panels: Satin Plain works well, since no one walks on it. The same plank can go on the wall and the floor.
We do not publish a slip rating or an abrasion class for our designs. If your specification calls for a stated figure, ask us for test data on the exact design before you write it into the tender.
Sizes and layouts for large floors
- **200x1400mm:** the longest board Metro makes, chosen for showrooms and open-plan floors where the length can show. 4 tiles a box, 12.05 sq ft.
- **200x1200mm:** the widest choice, with 61 designs and 41 of them in Matt Texture. Suits offices and restaurants. 5 tiles a box, 12.91 sq ft.
- **Chevron 150x900mm:** Metro shows ten chevron laying patterns, and patterns 07 to 10 change direction for retail floors and lobbies. The chevron installation guide covers setting out.
- **Diamante:** an elongated hexagonal plank with accent variants, used for reception floors and feature walls.
Run planks along the main sightline: from the entrance towards the counter in a café, along the length of a showroom. Cross joints at a doorway look like a mistake from the street.
Laying notes for long runs and heavy use
- Plan movement joints. A large tiled floor needs movement joints in the field, at the perimeter and over every structural joint in the slab. In heavily used areas, use a metal joint profile. Schluter, for example, describes its DILEX-EDP stainless steel profile as suited to ceramic tile under high mechanical stress, including shopping centres and floors maintained with cleaning machines.
- Order the full quantity at once. Lay one area from one batch and one calibre code. A top-up order months later may not match.
- Keep attic stock. Hold back at least a box per design for repairs. A chipped tile under a dropped load is lifted and replaced.
- Offset by a quarter plank, never half: 300 mm on 200x1200mm, 350 mm on 200x1400mm. Keep the arrows on the back all pointing one way.
- Joints of 3 to 5 mm with spacers of at least 3 mm for planks; at least 2 mm for chevron and Diamante.
- Cure before traffic. Let the bed cure three to four days before grouting, and protect the finished floor while other trades are still working.
Public buildings and accessibility
For buildings open to the public, India's Harmonised Guidelines and Standards for Universal Accessibility 2021 ask that corridor floors be stable, firm, level and slip-resistant, and that they contrast with the walls in tone and colour. Where flooring changes, say from carpet to tile, the guidelines call for a flat floor trim across the full transition. A mid or dark plank against a pale wall meets the contrast point without effort, and Matt Texture is the surface to start from.
Where wooden tiles are not the right floor
- The cooking line of a commercial kitchen, with hot grease, hosing down and heavy equipment, needs a floor specified for that use. Put the wooden tiles in the dining room.
- Warehouses and stockrooms with forklifts or pallet trucks need an industrial floor, not a decorative plank.
- A slab that is not flat or still moving will crack any tile. Fix the substrate first.
Before the order
Settle the surface for each zone, the format, the batch quantity and the movement joint layout on the drawings. Specifications and the laying instruction catalogue are on the download page. For samples, quantities or a rate on your project, talk to our team.
Planning wooden tiles for your home?
Tell us the room and the size you have in mind. Our team replies within 24 to 48 hours, and we can post you a sample first so you can see the surface in your own light.
Frequently asked questions
Are wooden tiles suitable for commercial spaces?
Yes, for offices, showrooms, cafés and restaurant dining areas. The glaze takes foot traffic and daily cleaning, and the floor never needs sanding or polishing, so there is no closure for refinishing.
Which wooden tile surface is best for a restaurant?
Matt Texture. Its grain relief gives grip when the floor is wet or has an oil film, which is the normal state of a busy dining floor.
Which plank size works best in a showroom?
200x1400mm, the longest Metro plank, shows its length over a long floor. 200x1200mm offers the most designs if you need a particular colour.
Do wooden tiles need movement joints on a large floor?
Yes. Plan joints in the field, at the perimeter and over structural joints in the slab, and use metal profiles where traffic is heavy.
Can wooden tiles take office chairs with castors?
Yes. The glazed surface does not dent under castors the way timber does. Keep the floor free of grit, which is what scratches any hard surface.
How much extra stock should a commercial project keep?
At least one box per design, from the same batch, for future repairs. More on large floors, where a later order may not match the original calibre.