Price depends on size, finish and order quantity. Metro supplies through tile retailers and directly to projects, so a rate is quoted per square metre against your area rather than listed. Send through the format and the area you need and you will get a rate back. Every design in the catalogue lists its size and finish.
- Home
- Wooden Tiles
Timber Look Tiles for Indoor and Alfresco
Metro makes timber look tiles in four plank sizes from 150x900mm to 200x1400mm, plus chevron and diamante. 207 designs rated for indoor floors and walls and for covered alfresco areas, at 9 to 9.5 mm.
Order by
BROWSE BY FORMAT
Four plank sizes and two pattern collections
Plank sizes
150x900mm with 70 designs, 200x1000mm with 56, 200x1200mm with 61 and 200x1400mm with 20. The 150x900mm plank is the narrowest and reads closest to a sawn timber board.
Chevron
Planks cut at an angle so they meet in a continuous V. Available in 150x900mm and 80x450mm across the chevron collection.
Diamante
A diamond set pattern in 203x1010mm, used for feature floors and wall elevations.
Timber look tiles
What timber look tiles are, and where they work
Timber look tiles are glazed ceramic tiles printed and textured to carry the grain, knots and tonal variation of sawn timber. They are laid with adhesive and grout like any other ceramic tile, and once down they behave like ceramic. No sealing, no resanding, no swelling in humidity and no termite risk, which is why they go into bathrooms, laundries and alfresco areas where real timber struggles.
Sizes and formats
Metro produces four plank formats. The 150x900mm is the narrowest and reads closest to a traditional timber board, with 70 designs available. The 200x1000mm and 200x1200mm suit larger rooms where fewer grout lines give a calmer floor. The 200x1400mm is the longest board and is usually specified for open plan living areas and showrooms. Chevron and diamante are supplied as separate pattern collections.
Surfaces
Three surfaces are available. Satin Plain has a smooth low sheen face. Matt Texture carries a grain relief you can feel underfoot and is the usual choice for bathrooms, alfresco areas and staircases because of its grip. Satin Texture sits between the two, with light relief and a soft sheen.
Colours
Ten tones run from Natural Clear Stain and White at the palest end, through Golden Honey, Nutmeg, Warm Chestnut and Cinnamon in the mid range, to Tuscan Coffee, Merlot, Grey and Dark Grey at the darker end. Paler tones make small rooms read larger. Darker and grey tones hide dust in high traffic areas.
Where these tiles are used
Indoors these tiles are laid in living rooms, bedrooms, kitchens and bathrooms. The Matt Texture surface is rated for bathroom floors and wet areas. On staircases the 150x900mm plank cuts cleanly to tread depth, and the same tile is used for riser faces. Outdoors they are specified for covered alfresco areas, balconies and verandahs, and on facade walls where a timber look is wanted without the maintenance of real timber.
Technical specification
| Material | Glazed ceramic |
| Thickness | 9 to 9.5 mm |
| Water absorption | 6 to 8% |
| Edge | Curve edge, non rectified |
| Plank sizes | 150x900mm, 200x1000mm, 200x1200mm, 200x1400mm |
| Pattern collections | Chevron 150x900mm and 80x450mm, Diamante 203x1010mm |
| Surfaces | Satin Plain, Matt Texture, Satin Texture |
| Application | Indoor floor and wall, covered alfresco |
| Manufactured in | Morbi, Gujarat, India |
Frequently Asked Questions
-
What does timber look tile cost?
-
Can timber look tiles be used in bathrooms?
-
What is the difference between timber look tiles and timber flooring?
-
Which size is best for a small room?
-
Can these tiles be laid outdoors?