17 November 2026 7 min read
How to clean wood look tile and grout, and what never to use on it
People buy wood look tile so they never have to refinish a floor again. That part is true. Then, a year in, the grout in front of the stove has gone two shades darker, and someone reaches for vinegar because the internet said so.
The tile itself is the easy part. The grout is where the work is. Here is a cleaning routine that keeps both looking new, and the products that quietly wear grout down.
Why the tile and the grout need different care
Our planks are glazed ceramic. The glaze is the face you walk on, and it does not soak up spills. You never sand, oil, wax or seal the tile itself.
Grout is different. Most floors are grouted with cement-based grout, which is porous. It takes in dirt, grease and water, and it reacts with acids. The epoxy kind is much less porous and cleans more easily, but it still needs the right cleaner. Nearly every "my tile looks dirty" problem is a grout problem.
The weekly routine
- Dry first. Sweep, dust-mop or vacuum. Grit is what scratches and dulls a floor over time, and wet-mopping a gritty floor just moves the grit into the joints.
- Damp-mop with a pH-neutral cleaner. Use one made for tile and grout, diluted as the label says. TEC, a grout maker, gives diluted dishwashing soap as an example of a pH-neutral cleaner for everyday cleaning.
- Rinse and dry. Go over the floor with clean water, then let it dry or wipe it. Cleaner left in the joints attracts dirt back.
- Wipe spills fast. Coffee, juice, wine, tomato sauce and soda are acidic and can etch cement grout if left to sit.
A microfiber flat mop works better than a string mop. It puts down less water and pulls dirt out of the grout instead of pushing it in.
Cleaning textured planks
Matt Texture and Satin Texture surfaces carry real grain relief. That relief is what gives grip on a bathroom or porch floor, and it also holds a little more dirt in the low spots than a smooth plank does.
Once a month or so, scrub a textured floor with a soft nylon brush or a deck brush and your usual pH-neutral cleaner, working along the grain. Then rinse. On outdoor-styled designs with ribbed decking relief, such as Ipe Out Black in 200x1200mm (8 x 48 in), sweep along the ribs and rinse with a garden hose. Our post on outdoor wood look tile covers porches and patios.
Smooth Satin Plain designs, like 5017 in 150x900mm (6 x 36 in), only need the weekly routine. They are better kept to dry rooms and walls, which is also why they stay cleaner. The surface of every design is listed in our catalogs.
Deep cleaning dirty grout
When the routine stops working, match the cleaner to the dirt. TEC's technical bulletin for cement-based grout gives the plain rule:
- Grease and soap scum: use an alkaline cleaner.
- Hard water deposits and mineral stains: use an acid-based cleaner, only for that job and not as a routine product.
- Always: test a small hidden area first, scrub the joints with a white nylon pad, then rinse with clean water and dry.
Kitchen floors near the range and bathroom floors near the shower are the usual places to need this. Our guides to wood look tile in a kitchen and bathrooms and wet areas cover the choice of grout for those rooms.
Sealing cement grout
Sealing will not stop every stain. It slows water and spills down so you have time to wipe them. Laticrete notes that a sealed joint gives you time to wipe up a spill before it stains, but cannot stop an acid from etching it.
Seal cement grout once it has cured, following the sealer maker's timing. Reseal when water stops beading on the joint and starts darkening it instead. Wet areas need it more often than a dry hallway. Grout made from epoxy generally needs no sealer; check its maker's instructions.
Once grout is sealed, check the sealer's label before choosing a cleaner. Laticrete warns that ordinary household cleaners, including acidic or alkaline cleaners, bleach, abrasives and ammonia, can degrade the sealer.
What not to use on wood look tile floors
- Vinegar and lemon cleaners. They are acids, and used routinely they degrade cement grout. The popular vinegar-and-water mix is the worst habit on this list.
- Bleach and ammonia. Fine for a one-off disinfecting job if the grout maker allows it, harmful as a weekly cleaner.
- Wax, oil soaps and "shine" products. The glaze needs no wax. These leave a film that dulls the face and traps dirt in the grout.
- Abrasive powders for routine cleaning. Keep scouring cleansers for spot stains.
- Steel wool and wire brushes. They can mark the glaze and tear into grout.
- Heavy scrubbing machines, often. The TEC bulletin warns that regular use can damage grout over time.
Small damage and long-term care
- Felt pads under chairs and table legs stop grit being ground into the glaze.
- Mats at entrances catch the sand that does most of the wear.
- Keep the spare tile. If you bought 10% extra at the time of order, a cracked plank years later is a swap from the same batch.
- New floor haze. A cloudy film after installation is grout residue, not a tile fault. Your installer should clean it off the same day; an old film needs a haze remover made for the grout type.
The short version
Sweep, damp-mop with a pH-neutral cleaner and rinse. Deep-clean grout with the right product for the dirt, seal cement grout and reseal it when water stops beading. Leave vinegar, bleach, wax and oil soaps out of the routine. Choosing a floor and want the lowest-upkeep option? Talk to our team about surface and grout before you order.
Planning a wood look tile floor?
Tell us the room and the size you have in mind. Our team replies within 24 to 48 hours, and we can post you a sample first so you can see the surface in your own light.
Frequently asked questions
What is the best way to clean wood look tile?
Sweep or vacuum first, then damp-mop with a pH-neutral cleaner made for tile and grout. Rinse with clean water and let the floor dry so no residue stays in the joints.
Can I use vinegar on wood look tile?
Not as a routine cleaner. Vinegar is an acid, and used regularly it wears cement grout down. Use a pH-neutral cleaner made for tile and grout instead.
Do wood look tiles need to be sealed?
The glazed tile does not. Cement-based grout should be sealed after it cures and resealed when water stops beading on it. Grout made from epoxy generally does not.
How do I get dirty grout clean again?
Match the cleaner to the dirt: an alkaline cleaner for grease and soap scum, an acid-based cleaner only for hard water deposits. Test a hidden spot first, scrub, rinse and dry.
Can I use a steam mop on wood look tile?
Check your grout maker's instructions first. TEC says its epoxy grout can handle steam cleaning; for cement grout and sealed joints, follow what the grout and sealer makers allow.
How do I clean textured wood look tile?
Use the weekly routine, then once a month scrub along the grain with a soft nylon brush and a pH-neutral cleaner, and rinse. The relief holds a little more dirt than a smooth plank.